Battery AGM Exide EK013 1.2Ah, 18A, 12V (∓) 97x43x58

Battery AGM Exide EK013 1.2Ah, 18A, 12V (∓) 97x43x58

EUR 14.70

EXIDE AGM EK013 Battery 1.2Ah, 18A, 12V, 97x43x58 mm EXIDE AGM | COMPACT AND RELIABLE AUXILIARY POWER EXIDE AGM EK013 is a high-quality, ultra-compact 12V AGM battery featuring 1.2Ah capacity and an 18A (EN) cold cranking rating. Designed for specialised auxiliary electrical systems requiring a compact and dependable energy source, it combines advanced AGM / VRLA technology with stable electrical performance, enhanced cycling characteristics and maintenance-free operation without regular water topping-up. EXIDE AGM EK013 is designed for applications where compact dimensions, precise electrical specifications and dependable energy delivery are essential. Its low capacity and small housing make it suitable for compatible automotive auxiliary or backup electrical systems, provided the vehicle manufacturer specifies this battery type. The EK013 features an ultra-compact C20 case measuring only 97 × 43 × 58 mm and weighing approximately 0.50 kg. It is equipped with Faston S 4.8 mm flat terminals, ETN 4 polarity and a B0 hold-down configuration. These details are particularly important when selecting a replacement for an original auxiliary battery. Key specifications 1.2 AhCapacity 18 ACCA (EN) 12 VVoltage Dimensions: 97 × 43 × 58 mm Case size: C20 Polarity: ETN 4 Terminal type: Faston S (4.8 mm) Hold-down: B0 Weight: approximately 0.50 kg Technology: AGM / VRLA Application: specialised auxiliary battery AGM and VRLA technology AGM (Absorbent Glass Mat) is an advanced lead-acid battery technology in which the electrolyte is absorbed within specially designed glass-fibre separators. This construction reduces the risk of free liquid electrolyte leakage and supports stable electrical performance. It is particularly useful in compatible compact auxiliary battery applications requiring dependable energy delivery. VRLA (Valve Regulated Lead Acid) is a valve-regulated battery design that promotes gas recombination under normal operating conditions and reduces routine maintenance requirements. No regular water topping-up is required. Using a charger designed for small-capacity AGM batteries helps maintain proper battery operation and service life. Ultra-compact dimensions — measuring just 97 × 43 × 58 mm, this battery fits compatible electrical systems with limited installation space. Advanced AGM construction — electrolyte is absorbed within glass-fibre separators, reducing the risk of leakage. Reliable 12V auxiliary energy reserve — 1.2Ah capacity provides electrical support for compatible low-power auxiliary systems. Main advantages 1.2Ah capacity for specialised auxiliary power applications 12V nominal voltage 18A (EN) manufacturer-specified cold cranking rating Advanced AGM glass-fibre separator technology Valve-regulated VRLA construction Reduced risk of free liquid electrolyte leakage No regular water topping-up required Ultra-compact dimensions and approximately 0.50 kg weight C20 case measuring 97 × 43 × 58 mm Faston S 4.8 mm flat terminals ETN 4 polarity and B0 hold-down configuration Suitable for compatible specialised auxiliary power systems EXIDE automotive battery manufacturing experience Technical specifications EXIDE AGM EK013 – technical data ManufacturerEXIDE SeriesAGM ModelEK013 Product codeEXEK013 EAN / GTIN3661024038058 Voltage12 V Capacity1.2 Ah Cold cranking current (EN)18 A Length97 mm Width43 mm Height58 mm Dimensions (L × W × H)97 × 43 × 58 mm Case sizeC20 PolarityETN 4 Terminal typeFaston S (4.8 mm) Hold-downB0 TechnologyAGM (Absorbent Glass Mat) ConstructionVRLA Weight (approximate)0.50 kg Applications and compatibility EXIDE AGM EK013 is a specialised low-capacity battery for auxiliary or backup electrical systems requiring this particular 12V AGM battery configuration. It may be used in compatible automotive electronic systems when specified by the vehicle manufacturer. It is not intended to replace a vehicle's primary starter battery. Compatible automotive auxiliary electronic systems Specialised 12V secondary power applications Low-power electronic modules with matching requirements Equipment designed for C20 battery dimensions Systems using Faston S 4.8 mm connectors Replacement of an original EK013 or fully compatible battery Important before purchase EXIDE EK013 is not a primary automotive starter battery. Before ordering, verify the vehicle VIN or original equipment reference, voltage, capacity, case dimensions, polarity and terminal configuration. EK013 uses Faston S 4.8 mm flat terminals, ETN 4 polarity and a C20 case. Standard large automotive tapered terminals are not directly compatible. Use charging equipment specifically suitable for small-capacity AGM batteries. Frequently asked questions Can EXIDE EK013 be used as a main starter battery? No. With a capacity of only 1.2Ah, it is intended for compatible specialised auxiliary electrical systems, not for replacing a conventional vehicle starter battery. What terminals does EK013 use? The battery features Faston S 4.8 mm flat terminals. Verify the mating connectors and positive and negative terminal positions before installation. Does EK013 require maintenance? Its AGM / VRLA construction does not require regular water topping-up. However, proper charging practices and a suitable AGM charger remain important.