Battery EFB Exide EL605 60Ah, 520A,12V (+ -) 232x173x225

Battery EFB Exide EL605 60Ah, 520A,12V (+ -) 232x173x225

EUR 106.00

Exide EFB EL605 Battery 60Ah, 520A, 12V (+ -) 230x173x222 EXIDE EFB | RELIABLE START-STOP POWER FOR EVERYDAY DRIVING Exide EL605 EFB is a modern and dependable 12V automotive starter battery designed for vehicles equipped with Start-Stop systems and increased electrical requirements. With a 60Ah capacity and 520A (EN) cold cranking current, it provides reliable engine starting, a stable energy reserve and efficient charge acceptance. Advanced EFB technology helps maintain dependable performance even during intensive urban driving and frequent engine restarts. The Exide Start-Stop EFB range is developed for vehicles requiring greater cycling durability than conventional starter batteries. EFB (Enhanced Flooded Battery) technology improves charge acceptance, resistance to repeated charging and discharging cycles and reliable electrical performance in modern vehicle systems. The EL605 features a D23 case measuring 230 × 173 × 222 mm. It has a left-side positive terminal (+ -), ETN 1 polarity, standard EN tapered terminals and a B0 hold-down configuration. These specifications are important when selecting a battery for vehicles with a compatible D23 battery compartment. Key parameters 60 Ah Capacity 520 A Cold cranking current (EN) 12 V Voltage EFB technology EFB (Enhanced Flooded Battery) is an advanced flooded lead-acid battery technology. Improved construction and modern battery materials enhance dynamic charge acceptance and resistance to the frequent cycling demands associated with Start-Stop vehicles. The Exide EFB range offers up to 3 times greater cycling durability than standard conventional starter batteries. It is optimised for partial state-of-charge operation and suitable for compatible Start-Stop and regenerative braking systems. Advantages Advanced EFB Start-Stop technology 60Ah capacity for a dependable energy reserve 520A (EN) cold cranking current for reliable engine starting High dynamic charge acceptance Up to 3 times greater cycling durability than conventional starter batteries Optimised for partial state-of-charge operation Suitable for vehicles with compatible Start-Stop systems Supports compatible energy recuperation functions Stable performance in demanding urban driving conditions Enhanced durability during frequent engine stops and restarts D23 case — 230 × 173 × 222 mm Left-side positive terminal (+ -), ETN 1 polarity Standard EN tapered terminals B0 hold-down Trusted Exide quality and enhanced long-term durability Technical specifications ManufacturerExide SeriesStart-Stop EFB ModelEL605 Product codeEXEL605J EAN / GTIN3661024036726 TechnologyEFB (Enhanced Flooded Battery) Voltage12 V Capacity60 Ah Cold cranking current (EN)520 A Length230 mm Width173 mm Height222 mm Dimensions (L × W × H)230 × 173 × 222 mm Case sizeD23 PolarityETN 1 (+ -), positive on left Terminal typeEN tapered terminals Hold-downB0 Weight (approximate)15.40 kg Applications Exide EL605 is intended for vehicles requiring a 12V EFB starter battery with 60Ah capacity and 520A (EN) cold cranking current. Its D23 case and B0 hold-down are designed for compatible battery compartments, although the vehicle manufacturer's installation requirements must always be checked. Vehicles equipped with compatible Start-Stop systems Passenger cars with increased electrical requirements Selected Asian vehicles using D23 battery cases Vehicles frequently used for urban journeys Applications requiring left-side positive polarity (+ -) Vehicles requiring EN terminals and B0 mounting Important before purchase Before ordering, verify the vehicle's VIN or original equipment battery reference, required capacity, cold cranking current, dimensions, polarity and mounting configuration. Exide EL605 features a D23 case (230 × 173 × 222 mm), ETN 1 polarity, left-side positive terminal (+ -), EN terminals and B0 hold-down. Do not confuse it with EL604, which has the opposite polarity. If the vehicle was originally equipped with an AGM battery, EFB should not be used as a direct replacement without manufacturer approval. Some vehicles require battery registration or electronic system adaptation after replacement. Frequently asked questions (FAQ) Which vehicles can use Exide EL605? It is designed for vehicles requiring a 60Ah, 520A (EN) EFB battery with a D23 case, ETN 1 polarity and B0 hold-down. Exact compatibility should be confirmed using the vehicle VIN or OE battery reference. How does EFB differ from a conventional starter battery? EFB provides improved charge acceptance and up to 3 times greater cycling durability than conventional starter batteries. It is especially useful in vehicles with frequent engine stops and restarts. What is the difference between Exide EL605 and EL604? Both models have 60Ah capacity, 520A (EN) starting current and identical dimensions. Their polarity differs: EL605 has a left-side positive terminal (+ -), ETN 1, while EL604 has a right-side positive terminal (- +), ETN 0. Is Exide EL605 suitable for winter driving? Yes. Its 520A (EN) cold cranking current supports engine starting in low temperatures, provided the battery is adequately charged, in good condition and suitable for the vehicle. Can an EFB battery be replaced with an AGM battery? In some vehicles, an AGM replacement is possible when approved by the manufacturer and supported by the charging system. Dimensions, polarity, mounting compatibility and battery registration requirements must also be checked. What are the dimensions and hold-down of Exide EL605? According to the manufacturer, the battery measures 230 × 173 × 222 mm, uses a D23 case and B0 hold-down, and weighs approximately 15.40 kg.