Brake Caliper Paint Spray, Yellow, BOLL 001112, 400 ml
- Description
- Properties
- Reviews
-
BOLL Brake Caliper Paint Spray, Yellow, 400 ml, 001112
Give your brake calipers a bold, sporty yellow finish with additional protection against heat, corrosion, brake dust and road salt!
BOLL Brake Caliper Paint 001112 is a high-quality heat-resistant aerosol paint specially developed for painting and protecting automotive brake calipers. Made from premium-quality resins, it creates a durable, vibrant yellow coating with a striking high-gloss finish.
The coating offers temperature resistance up to +230°C and withstands exposure to brake dust, road salt and chemicals. Its anti-corrosion properties help protect properly prepared metal surfaces against rust and environmental damage.
Supplied in a practical 400 ml aerosol can, BOLL Brake Caliper Paint is an excellent choice for refreshing brake calipers and achieving a distinctive protective finish without specialist spray equipment.
400 mlAerosol CapacityYellowCoating Colour+230°CHeat Resistance Up To12 hDrying at +20°CKey Features and Benefits
- High-temperature resistance – the properly applied and dried coating withstands temperatures up to +230°C.
- Vibrant yellow finish – gives brake calipers a distinctive sporty appearance, particularly noticeable behind alloy wheels.
- High-gloss coating – produces an attractive glossy finish that complements the vehicle's exterior styling.
- Anti-corrosion protection – helps protect exposed metal surfaces against rust and moisture.
- Brake dust resistance – formulated to withstand the demanding environment around braking components.
- Road salt resistance – particularly beneficial for vehicles driven in winter conditions.
- Chemical resistance – offers increased durability against chemical exposure.
- Premium resin formulation – creates a durable coating on properly prepared surfaces.
- Convenient spray application – suitable for brake caliper refinishing without specialist spray equipment.
- Practical 400 ml packaging – ideal for localised painting and refreshing existing brake caliper finishes.
Technical Specifications
Manufacturer BOLL Product Name Brake Caliper Paint Spray Product Type Heat-resistant brake caliper paint Formulation Premium-quality resin-based paint Colour Yellow Finish High gloss Packaging Aerosol spray can Volume 400 ml Temperature Resistance Up to +230°C Recommended Application Temperature +18°C to +25°C Surface Preparation P240–P360 abrasive paper Spraying Distance 15–20 cm Recommended Number of Coats 2–3 coats Flash-Off Time Between Coats 5–10 minutes Drying Time Approx. 12 hours at +20°C Shelf Life 24 months from the date indicated on the packaging Manufacturer Part Number 001112 Store Product Code BO001112 EAN 5907588408776 Applications and Compatibility
BOLL Brake Caliper Paint is designed for painting suitable external metal surfaces of automotive brake calipers. It helps restore their appearance with a vibrant, glossy yellow finish while providing additional protection against corrosion, brake dust and road salt.
- Painting external metal surfaces of passenger car brake calipers.
- Refreshing worn or faded brake caliper finishes after proper preparation.
- Creating a sporty, distinctive appearance behind alloy wheels.
- Providing additional protection against corrosion and road salt.
- Refinishing compatible existing brake caliper coatings after appropriate surface preparation.
This product is intended for protective and decorative painting. It is not suitable for coating brake discs, pads, seals or moving braking components.
Directions for Use
- Preparation: ensure that the brake caliper is completely cool. Carefully mask all components that must not be painted.
- Sanding: prepare the metal surface with P240–P360 abrasive paper and remove any loose rust particles.
- Cleaning: thoroughly clean and degrease the surface using a suitable product such as BOLL Silicone Remover. Allow it to dry.
- Application temperature: work at the recommended temperature of +18°C to +25°C.
- Shake thoroughly: shake the aerosol can for approximately 3 minutes before use.
- Spraying: apply 2–3 even coats from a distance of 15–20 cm.
- Flash-off time: allow 5–10 minutes between each coat.
- Drying: allow approximately 12 hours at +20°C for the coating to dry. Lower temperatures may increase drying time.
- Valve cleaning: after use, invert the container and spray until the valve is clear.
Important Safety InformationApply only to suitable external metal surfaces of brake calipers. Never paint brake discs, pads, friction surfaces, pistons, rubber seals, brake hoses, bleed screws or moving brake components. Mask these areas carefully before spraying. Do not apply to hot braking components.
The aerosol is flammable. Use in a well-ventilated environment, away from flames, sparks and other ignition sources. Always follow the safety warnings on the product label and Safety Data Sheet.
Storage Information
Store in a dry location, protected from direct sunlight and excessively high or low temperatures. The manufacturer's specified shelf life is 24 months from the date indicated on the packaging.
Frequently Asked Questions
Is BOLL Yellow Brake Caliper Paint heat-resistant?
Yes. The properly applied and dried coating offers temperature resistance up to +230°C according to the manufacturer.
Does the paint protect brake calipers against corrosion?
Yes. It offers anti-corrosion properties and resistance to brake dust, road salt and chemicals.
How many coats should be applied?
BOLL recommends applying 2–3 coats with a 5–10 minute interval between coats.
How long does BOLL Brake Caliper Paint take to dry?
The manufacturer's technical data sheet specifies approximately 12 hours at +20°C.
Can the paint be sprayed directly onto rust?
Loose rust must be removed. The surface should be sanded with P240–P360 abrasive paper, cleaned and degreased before painting.
Can this paint be used on brake discs?
No. Brake discs, pads and other friction surfaces must remain free of paint, as contamination may compromise braking performance.
Note: Technical specifications and application instructions are based on BOLL manufacturer documentation. Results depend on surface preparation, coating thickness and application conditions. The paint is designed for protective and decorative refinishing, not for repairing mechanical faults in the braking system. -
Volume 400 ml
