Brake Caliper Paint Spray, Silver, BOLL 001114, 400 ml
- Description
- Properties
- Reviews
-
Brake Caliper Paint Spray, Silver, BOLL 001114, 400 ml
Restore your brake calipers with a sleek, high-gloss silver finish and additional protection against heat, corrosion, brake dust and road salt!
BOLL Brake Caliper Paint 001114 is a premium-quality heat-resistant aerosol paint specifically developed for painting and protecting automotive brake calipers. Manufactured using high-quality resins, it creates a durable, attractive silver-coloured coating with a brilliant high-gloss finish.
The properly applied and dried coating withstands temperatures up to +230°C and offers resistance to brake dust, road salt and chemicals. Its anti-corrosion properties help protect properly prepared metal surfaces against rust and environmental exposure.
Supplied in a practical 400 ml aerosol can, BOLL Brake Caliper Paint makes it easy to refresh the appearance of brake calipers and achieve an elegant silver finish without professional spray equipment.
400 mlAerosol CapacitySilverCoating Colour+230°CHeat Resistance Up To12 hDrying at +20°CKey Features and Benefits
- High-temperature resistance – properly applied and dried coating withstands temperatures up to +230°C.
- Elegant silver colour – restores a fresh, clean and modern appearance to brake calipers.
- High-gloss finish – creates an attractive glossy surface that complements the vehicle's wheel design.
- Anti-corrosion properties – helps protect properly prepared metal surfaces against rust and moisture.
- Brake dust resistance – specially developed for the demanding environment around automotive braking components.
- Road salt resistance – particularly useful for vehicles exposed to winter road conditions.
- Chemical resistance – helps maintain the coating's protective and decorative properties during normal use.
- High-quality resin formulation – forms a durable protective coating on correctly prepared surfaces.
- Convenient spray application – allows brake caliper refinishing without specialised painting equipment.
- Practical 400 ml packaging – suitable for restoring brake caliper appearance and localised painting work.
Technical Specifications
Manufacturer BOLL Product Name Brake Caliper Paint Spray Product Type Heat-resistant brake caliper paint Formulation High-quality resin-based paint Colour Silver Finish High gloss Packaging Aerosol spray can Volume 400 ml Heat Resistance Up to +230°C Recommended Application Temperature +18°C to +25°C Surface Preparation P240–P360 abrasive paper Spraying Distance 15–20 cm Recommended Number of Coats 2–3 coats Time Between Coats 5–10 minutes Drying Time Approx. 12 hours at +20°C Shelf Life 24 months from the date indicated on the packaging Manufacturer Part Number 001114 Store Product Code BO001114 EAN 5907588408813 Applications and Compatibility
BOLL Brake Caliper Paint is designed for painting suitable external metal surfaces of automotive brake calipers. The glossy silver finish refreshes the appearance of the braking system while providing additional protection against corrosion, road salt and brake dust.
- Painting external metal surfaces of passenger car brake calipers.
- Restoring the appearance of old, faded or worn brake calipers.
- Achieving a clean, factory-style silver appearance.
- Providing additional protection against moisture, road salt and corrosion.
- Refinishing compatible existing coatings after correct surface preparation.
The paint is intended for protective and decorative treatment only. It does not repair mechanical braking system faults. Always check surface suitability before painting.
Directions for Use
- Preparation: make sure the brake caliper is completely cool. Carefully mask all components that must not be painted.
- Sanding: prepare the surface using P240–P360 abrasive paper and remove loose rust particles.
- Cleaning and degreasing: thoroughly clean and degrease the surface using a suitable product such as BOLL Silicone Remover. Allow it to dry.
- Application temperature: the recommended temperature is +18°C to +25°C.
- Shake the aerosol: shake thoroughly for approximately 3 minutes before use.
- Spraying: apply 2–3 even coats from a distance of 15–20 cm.
- Time between coats: allow 5–10 minutes between applications.
- Drying: allow approximately 12 hours at +20°C. Lower temperatures may extend the drying time.
- Clean the valve: after use, turn the aerosol can upside down and spray briefly until the valve is clear.
Important Safety InformationApply only to suitable external metal surfaces of brake calipers. Never paint brake discs, pads, friction surfaces, pistons, rubber seals, brake hoses, bleed screws or moving brake components. Mask these areas carefully before spraying. Do not apply paint to hot braking components.
The aerosol is flammable. Work in a well-ventilated area, away from open flames, sparks and ignition sources. Always follow the safety information on the product packaging and in the Safety Data Sheet.
Storage Information
Store in a dry location, protected from direct sunlight and excessively high or low temperatures. The manufacturer's specified shelf life is 24 months from the date indicated on the packaging.
Frequently Asked Questions
Is BOLL Silver Brake Caliper Paint heat-resistant?
Yes. According to BOLL, the properly applied and dried coating withstands temperatures up to +230°C.
Does this paint have a matte or glossy finish?
BOLL 001114 creates a high-gloss silver-coloured coating. It is not a matte paint.
Does the paint protect brake calipers against corrosion?
Yes. It provides anti-corrosion properties and resistance to brake dust, road salt and chemicals.
How many coats should be applied?
BOLL recommends applying 2–3 coats with a 5–10 minute interval between coats.
How long does BOLL Brake Caliper Paint take to dry?
The manufacturer's specified drying time is approximately 12 hours at +20°C.
Can it be applied directly over rust?
Loose rust must be removed. Sand the surface with P240–P360 abrasive paper, then clean and degrease it before painting.
Can this paint be used on brake discs?
No. Brake discs, pads and other friction surfaces must remain free from paint to avoid compromising braking performance.
Note: Technical specifications and application instructions are based on official BOLL documentation. Actual results depend on surface preparation, application conditions and coating thickness. The product is intended for decorative and protective refinishing. -
Volume 400 ml
