Brake Caliper Paint Spray, Blue, BOLL 001115, 400 ml
- Description
- Properties
- Reviews
-
Brake Caliper Paint Spray, Blue, BOLL 001115, 400 ml
Give your brake calipers a striking sporty blue finish with additional protection against heat, corrosion, brake dust and road salt!
BOLL Brake Caliper Paint 001115 is a premium-quality heat-resistant aerosol paint specifically developed for painting and protecting automotive brake calipers. Manufactured using high-quality resins, it creates a durable, vibrant blue coating with a brilliant high-gloss finish.
The properly applied and dried coating withstands temperatures up to +230°C and offers resistance to brake dust, road salt and chemicals. Its anti-corrosion properties help protect correctly prepared metal surfaces against rust and adverse environmental conditions.
Supplied in a convenient 400 ml aerosol can, BOLL Brake Caliper Paint makes it easy to refresh the appearance of brake calipers and achieve an eye-catching protective finish without specialist spray equipment.
400 mlAerosol CapacityBlueCoating Colour+230°CHeat Resistance Up To12 hDrying at +20°CKey Features and Benefits
- High-temperature resistance – the properly applied and dried coating withstands temperatures up to +230°C.
- Vibrant blue colour – gives brake calipers an eye-catching sporty appearance, particularly noticeable behind alloy wheels.
- High-gloss finish – produces an attractive, glossy surface that complements the vehicle's exterior styling.
- Anti-corrosion protection – helps protect prepared metal surfaces against rust and moisture exposure.
- Brake dust resistance – designed to withstand the demanding conditions around automotive braking components.
- Road salt resistance – particularly beneficial for vehicles driven during winter conditions.
- Chemical resistance – helps maintain the coating's protective and decorative properties.
- Premium resin formulation – produces a durable coating on properly prepared metal surfaces.
- Convenient aerosol application – allows brake caliper refinishing without professional painting equipment.
- Practical 400 ml packaging – suitable for restoring brake caliper appearance and localised painting work.
Technical Specifications
Manufacturer BOLL Product Name Brake Caliper Paint Spray Product Type Heat-resistant brake caliper paint Formulation High-quality resin-based paint Colour Blue Finish High gloss Packaging Aerosol spray can Volume 400 ml Heat Resistance Up to +230°C Recommended Application Temperature +18°C to +25°C Surface Preparation P240–P360 abrasive paper Spraying Distance 15–20 cm Recommended Number of Coats 2–3 coats Time Between Coats 5–10 minutes Drying Time Approx. 12 hours at +20°C Shelf Life 24 months from the date indicated on the packaging Manufacturer Part Number 001115 Store Product Code BO001115 EAN 5907588409384 Applications and Compatibility
BOLL Brake Caliper Paint is designed for painting suitable external metal surfaces of automotive brake calipers. Its brilliant blue finish helps restore the appearance of the braking system while creating a sporty visual accent and providing additional protection against environmental exposure.
- Painting external metal surfaces of passenger car brake calipers.
- Restoring the appearance of older, faded or visually worn brake calipers.
- Creating a distinctive sporty blue accent behind alloy wheels.
- Providing additional protection against corrosion, moisture and road salt.
- Refinishing compatible existing coatings after appropriate surface preparation.
This product is intended for decorative and protective treatment only. It does not repair mechanical braking system faults. Always check surface compatibility before application.
Directions for Use
- Preparation: make sure the brake caliper is completely cool. Carefully mask all components that must not be painted.
- Sanding: prepare the surface using P240–P360 abrasive paper and remove loose rust particles.
- Cleaning and degreasing: thoroughly clean the surface using a suitable degreaser such as BOLL Silicone Remover. Allow it to dry completely.
- Application temperature: the recommended temperature is +18°C to +25°C.
- Shake the aerosol: shake thoroughly for approximately 3 minutes before use.
- Spraying: apply 2–3 even coats from a distance of 15–20 cm.
- Time between coats: allow 5–10 minutes between applications.
- Drying: allow approximately 12 hours at +20°C. Lower temperatures may extend the drying time.
- Clean the valve: after use, turn the aerosol upside down and spray briefly until the valve is clear.
Important Safety InformationApply only to suitable external metal surfaces of brake calipers. Never paint brake discs, pads, friction surfaces, pistons, rubber seals, brake hoses, bleed screws or moving brake components. Mask these areas carefully before spraying. Do not apply paint to hot braking components.
The aerosol is flammable. Work in a well-ventilated area, away from open flames, sparks and ignition sources. Always follow the safety warnings on the product packaging and in the Safety Data Sheet.
Storage Information
Store in a dry location, protected from direct sunlight and excessively high or low temperatures. The manufacturer's specified shelf life is 24 months from the date indicated on the packaging.
Frequently Asked Questions
Is BOLL Blue Brake Caliper Paint heat-resistant?
Yes. According to BOLL, the properly applied and dried coating offers heat resistance up to +230°C.
Is this the blue or navy blue version?
BOLL 001115 is the Blue version. The darker Navy Blue variant has a different manufacturer part number, 001118.
Does this paint have a matte or glossy finish?
BOLL 001115 creates a high-gloss blue finish, not a matte coating.
Does the paint help protect brake calipers against corrosion?
Yes. The coating has anti-corrosion properties and resistance to brake dust, road salt and chemicals.
How many coats should be applied, and how long does it take to dry?
BOLL recommends 2–3 coats with 5–10 minutes between them. The specified drying time is approximately 12 hours at +20°C.
Can the paint be applied directly over rust?
Loose rust must be removed. Sand the surface with P240–P360 abrasive paper, then clean and degrease it before painting.
Can this paint be used on brake discs?
No. Brake discs, pads and other friction surfaces must remain free of paint to avoid compromising braking performance.
Note: Technical information and application instructions are based on official BOLL documentation. Actual results depend on surface preparation, application conditions and coating thickness. This product is intended for protective and decorative refinishing. -
Volume 400 ml
